Ambit Microsystems make routers and communication devices for both residential and business purposes. To get access and control the settings of their Orion 3000 series routers, you need a default login gateway which can be accessed using an IP address. In this article, we have discussed the setup instructions required for logging inside the Ambit U10C007.
Once inside, you can control a lot of settings such as changing the SSID, changing the default username and password. Always remember to check the settings carefully before hitting the save button and if you can’t find a fix to some problem. It is always better to contact the manufacturer.
Steps To Login Inside Ambit Microsystems U10C007.60 Modem
Step 1: Open the web browser
Connect your modem with an RJ45 cable and see that the network is working. Open the web browser on your system connected to this home network and type the address 192.168.100.1 in URL and hit enter.
Step 2: Enter the Login Credentials
If you enter the correct IP address, you will see the login screen to enter the default credentials. If you have already changed the default credentials, be ready with the changed username and password. Below is the list of most common login credentials:
- Username: root
- Password: root
PS: The above combination was found to be correct in 95% cases.
Step 3: Setting Up U10C007.60 Login Details
Inside the modem settings, see for the wireless settings and be cautious about the settings you are going to configure.
Inside the modem settings, you can set the SSID or network name, type of internet connection, the security settings and also modify your modem connection.
You will be able to see some tabs like status, wireless settings, firewall, and system settings. There are many options which the user can change like the transmission rate, IP address and even the bandwidth. We always recommend you to change the default username and password. Use the below tips to change the username and password.
Tips to change your username and password:
- Your password should have a mixture of alphanumeric characters and special characters
- Your password should be 8-16 characters long, complex yet easy to remember
- Username should be user-friendly and simple
- Username and password for the modem needs to be written down somewhere
Step 4: Change the SSID of your U10C007.60 Modem
An SSID is called the service set Identifier which is essentially the name of your network as visible when you open the wifi tab. By default, it is always the name of the modem manufacturer.
If you don’t change the SSID, it can be very easy for anyone to predict the login details if they aren’t changed. Thus, it is highly recommended that you change the SSID of your new modem to something that is personal.
Steps to Change the SSID or Network Name:
- Make the SSID short and simple
- Don’t make it very fancy as it may backfire
- Don’t use any personal information to set the name of your router
Example: Jamers_Wifi, Alpha#1, Charlie#12
Step 5: Secure Ambit Microsystems U10C007.60 Modem Settings
When you log inside the modem, you can see a wireless settings tab or a tab for changing the security settings of the modem. In the encryption settings, you need to select the option WPA2-PSK which is the best encryption standard in the industry right now. This setting will ensure that a modem is secure at the optimum level.
Issues and FAQs
1. Does Ambit U10C007.60 support 5ghz?
No, Ambit U10C007.60 has a maximum of 2.4GHz speed.
2. How do I log into my Ambit U10C007.60?
You can log into the modem using the IP address 192.168.0.1 and entering the credentials
3. How to reset my Ambit U10C007.60?
To reset, Ambit U10C007.60 is to take a sharp pointed object and press-and-hold it over the reset button for 10 seconds. Once you are done, you will be able to enter the default credentials.