Gemtek routers have had a great performance with multiple models. Most of their routers have a default login gateway as 192.168.0.1 with an exception of WHRTC-100GW while the netmask remains the same as 255.255.255.0 and thus when it comes to changing certain router settings, you need to be aware of the default username and password.
In this guide below we help you understand what is the step by step process to log inside the Gemtek WHRTC-100GW router and how one can use it to secure their routers. Make sure to read the instructions carefully before you hit the save option.
Steps To Login Inside Gemtek WHRTC-100GW Router
Step 1: Open your web browser
Connect your router with an RJ45 cable and see if your network is working. Open the web browser and type the address 10.0.0.2 in URL and hit enter.
Step 2: Enter Login Credentials
On entering the correct IP address, you will see the login screen to enter the default credentials. If you have already changed the default credentials, be ready with the changed username and password. Below is the list of most common login credentials:
- Username: admin
- Password: admin
PS: The above combination was found to be correct in 90% cases.
Step 3: Setting Up WHRTC-100GW Login Details
Inside the router settings, see for the wireless settings and be cautious about the settings you are going to configure.
Inside the router settings, you can set the SSID or network name, type of internet connection, the security settings and also modify your router connection.
You will be able to see some tabs like status, wireless settings, firewall and system settings. There are a many options which the user can change like the transmission rate, IP address and even the bandwidth. We always recommend you to change the default username and password. Use the below tips to change the username and password.
Tips to change your username and password:
- Your password should have a mixture of alphanumeric characters and special characters
- Your password should be 8-16 characters long, complex yet easy to remember
- Username should be user-friendly and simple
- Username and password for the router needs to be written down somewhere
Step 4: Change the SSID of your WHRTC-100GW Router
A SSID is called the service set Identifier which is essentially the name of your network as visible when you open the wifi tab. Be default, it is always the name of the modem/router manufacturer.
If you don’t change the SSID, it can be very easy for anyone to predict the login details if they aren’t changed. Thus, it is highly recommended that you change the SSID of your new router to something that is personal.
Example for SSID: Amazing_web, A1b2, Active_Web
Tips to Change the SSID or Network Name:
- Make the SSID short and simple
- Don’t make it very fancy as it may backfire
- Don’t use any personal information to set the name of your router
Step 5: Secure Gemtek WHRTC-100GW Router Settings:
When you log inside the router, you can see a wireless settings tab or a tab for changing the security settings of the router. In the encryption settings, you need to select the option WPA2-PSK which is the best encryption standard in the industry right now. This setting will ensure that router is secure at the optimum level.
Issues and FAQs
1. Does Gemtek WHRTC-100GW support 5ghz?
No, Gemtek WHRTC-100GW has a maximum of 2.4GHz speed.
2. How do I log into my WHRTC-100GW?
You can log into the router using the IP address 10.0.0.2 and entering the credentials
3. How to reset my Gemtek WHRTC-100GW?
To reset, just take a sharp pointed object and press-and-hold it over the reset button for 10 seconds. Once you are done, you will be able to enter the default credentials.