Mobily connect routers are the ones which have great speeds and are also very secure when it comes to communication and also the working of the routers. Mobily connect-4G also can be logged in using the login IP address 192.168.2.1.
When it comes to securing the router, you need to make sure about the security settings such as the WPA2-PSK which is the standard security settings to be established these days. As it is with routers, you need to ensure that the router is maintained using some practices such as changing the username and password at equal intervals.
If you have the below things ready with you then the task of logging in will be a lot easier for the Mobily Connect-4G.
- See for the box of the router as it may contain the login credentials
- Also, make sure you have a system which is connected to the home network for which you will be making changes.
Steps To Login Inside Mobily Connect-4G login Router
Step 1: Open the web browser
You are required to connect your router with an RJ45 cable and see that the network is working. Open the web browser on your system connected to this home network and type the address 192.168.2.1 in the URL or search bar and hit enter.
Step 2: Enter the Login Credentials
If the IP address is relevant to your router, you will be able to see a login screen asking for username and password. Here you need to enter the default credentials in case you are entering the details for the first time. If you have already changed the default credentials, be ready with the changed username and password. Below is the list of most common login credentials:
- Username: admin
- Password: admin
The above combination was found to be correct in 90% cases.
Step 3: Setting Up Mobily Router Login Details
Now that you have entered into the router settings, see for the wireless settings and carefully look at the default settings and the changes that you are supposed to configure. In case you are getting a poor network connection then you should make sure that you contact your ISP.
Here you can change the SSID or network name, type of internet connection, the security settings and also modify your router’s connection. You will be able to see some tabs like status, wireless settings, firewall, and system settings. There are many options which the user can change like the transmission rate, IP address and even the bandwidth.
Tips to change your username and password:
- Your password should have a mixture of alphanumeric characters and special characters
- Your password should be 8-16 characters long, complex yet easy to remember
- Username should be user-friendly and simple
- Username and password for Huawei router needs to be written down somewhere
Step 4: Change the SSID Of your DG-HR3400 Router
An SSID is called the service set Identifier which is essentially the name of your network as visible when you open the wifi tab. By default, it is always the name of the router’s manufacturer. If you don’t change the SSID, it can be very easy for anyone to predict the login details if they aren’t changed. Thus, it is highly recommended that you change the SSID of your new router to something that is personal.
Steps to Change the SSID or Network Name:
- Make the SSID short and simple
- Don’t make it very fancy as it may backfire
- Don’t use any personal information to set the name of your router
Step 5: Secure Mobily Connect-4G Router Settings:
When you log inside the router, you can see a wireless settings tab or a tab for changing the security settings of the router. In the encryption settings, you need to select the option WPA2-PSK which is the best encryption standard in the industry right now. This setting will ensure that the router is secure at the optimum level.
FAQs or Fix To Common Problems
1. 192.168.2.1 won’t load
The issue may be due to two reasons. One could be because either the IP address does not correspond to your Mobily Connect-4G, else your router is not responding to the IP address. In this case, recheck the IP address of your router else contacts your ISP. 192.168.2.1 not responding is a similar issue.
2. 192.168.2.1 took too long to respond
This could be an issue on two levels. Either there is some hardware issue with the Mobily Connect-4G router which is hampering the ping request else the connection has a real problem with the router. In either case, reset the router and the system. The issue of 192.168.2.1 time out is a similar problem and the solution is the same.
3. Why 192.168.2.1 does not work
This could be because of one simple reason. 192.168.2.1 may not be the correct IP address for your router. You can either recheck or else try again by fixing the connection. The IP address 192.168.2.1 not opening web page is a similar issue which can be fixed only by re-checking the IP address relevant to the router.