Actiontec T3200 is a router from the Frontier series. These routers have speed connectivity of up to 300 Mbps and come with 4 gigabit ETH ports but no USB port. You can easily expect it to work on … [Read more...]
192.168.2.1 Default Router Admin IP Username and Password
192.168.2.1 is an IP address which is used for systems like Belkin, Edimax, Siemens, SMC and many more different routers. This range of IP address was put in action by the IANA to delay the lack of more IPv4 address range. You can never use this IP address to connect to any outside router beyond the home network.
Whenever you have to configure the router for making some changes, you need to login to the routers admin panel. 192.168.2.1 is one such IP address and this article will help you with all the possible username and password combination and even guide you on how to safeguard your router.
192.168.2.1 Username & Password
Every router and modem has login credentials and a default IP address that allows you to access the settings. 192.168.2.1 is one such IP address used to access settings of routers like TP-Link, 2Wire, ADSL routers, 3Com routers, and Westell ADSL modems to name a few.
To access the default gateway, there are few prerequisites:
- A system connected to the home Wifi
- A system where you can access a browser
Step 1: Open the browser
You need to enter the default router IP address in the search bar and if your router has this specific IP address, you will get the login page.
Step 2: Enter the username and password
If you have just got yourself a new router with a private IP address then you must have the default router username and password, Use the below column to find out the default router username and password:
List of the username and password
PS: The credentials are usually printed on the box of the router. If you don’t have the router box with you, you can simply reset the router by press-and-hold the reset button for 10-15 seconds. Once reset, you can enter the default login details. Another way is to access the official site of router.
Step 3: Change the SSID
Even if you are using a private IP address for your network. We recommend you to change the SSID which is the name of the network visible to others in your network tab.
- Keep it short and simple
- Don’t make it very quirky as it may backfire
- Don’t use any personal information as the name of your router
Step 4: Change the default username and password
Your router may have a private IP address but you need to always ensure you make your connection secure by changing the default credentials. Follow the below tips while changing the details.
Tips to change your username and password:
- Your password should have a mixture of alphanumeric characters
- Your password should be 8-16 characters long, complex yet easy to remember
- Username should be user-friendly and simple
- Username and password for 192.168.2.1 IP address needs to be written down somewhere
FAQs and Problems
Why can't I connect to router: http://192.168.2.1
Most people can’t connect to the default login gateway because of a typing error. You need to make sure there is no semicolon but a colon after http or https. The correct address is http://192.168.2.1
How do I change the password for 192.168.2.1
First Access the default gateway using 192.168.2.1. Enter the username and password and see for WiFi setting(methods differ as per the router/modem), If you have direct TV & wifi then use a home network and choose the wireless router option. Type in Device Code when requested (found on side of a gateway). You can change a name, SAVE
To change the default password, users need to select WPA/PSK encryption settings which will highlight the grayed out password. Now Change password and save.
Forgot IP address username and password
Whenever you purchase a new router or mode, you get the default credentials that are printed over the box or are mentioned on the manual. You can also contact the ISP(Internet Service Provider) to get the default credentials.
Fix 1: Now, if you have never changed the default username and password, you can use the below table to find out the details of your router.
Fix 2: if you have already changed the default username and password, then you need to reset the router so that you can use the default credentials once again.
Steps to reset a router:
Warning: Resetting a router will erase all the previous saved details and settings. It will turn your router into a factory made a router.
- Turn off the router
- Press-and-hold the reset button for 10-15 seconds using a pointed object like a needle and then turn on the router. Keep pressing the reset button until the router is turned on for 10-15 seconds
- Release the button and let the router reboot
- Now connect to the router using a wifi connection and or a network cable and log in using default credentials
Mobily connect routers are the ones which have great speeds and are also very secure when it comes to communication and also the working of the routers. Mobily connect-4G also can be logged in using … [Read more...]
Digisol routers are known to be very efficient and also portable. You can great good speeds from such routers and they come with the most up to date software and security features which allow users to … [Read more...]