The Technicolor TC8717T is a router by Comcast which is sold as an Xfinity router. Great for transferring data and other networking activities when working from home, the Technicolor TC8717T router … [Read more...]
192.168.0.1 Default Router IP Address, Login Username & Password
192.168.0.1 IP is part of the IPv4 network and fall in the 16-bit address type defined by IANA. You may also come across addresses like 192.168.1.1 and 10.0.0.1. Users who has configured a router before may have come across the IP address such as 192.168.1.1 or others in the same range.Routers of the brand like Netgear and D-link use the IP address 192.168.0.1 as their default login gateway.
Private IP addresses belong to the same network and thus can never have a conflict so easily. Using this address, users can easily log in to the router and make use of the settings to configure the device as per your ease. The most important task of such an IP address is to be able to connect with multiple routers and also provide the information required for any other router in the same range.
Prerequisites To access the default login gateway of router
-> A system connected to the home Wifi
-> A personal computer to access a browser
If you have a router which has the login IP as 192.168.0.1 then follow the below steps to log inside the router admin panel. Make sure you have a system ready connected to the home wifi, you should also have the box of your router to get the default username and password.
Step 1: Open the browser
You need to enter the default router IP address in the search bar and if your router has this specific IP address, you will get the login page. In our case, the default IP is http://192.168.0.1
Step 2: Enter the username and password
If you have just got yourself a new router with a private IP address then you must have the default router username and password, Use the below column to find out the default router username and password:
PS: if the above username and password doesn’t work, we recommend you to check the box of your router else contact the brand with your router model.
Step 3: Change the SSID
Even if you are using a private IP address for your network. We recommend you to change the SSID which is the name of the network visible to others in your network tab.
- Keep it short and simple
- Don’t make it very quirky as it may backfire
- Don’t use any personal information as the name of your router
Step 4: Change the default username and password
Your router may have a private IP address but you need to always ensure you make your connection secure by changing the default credentials. Follow the below tips while changing the details.
Follow the below steps to find the IP of your Router
- Open Command Prompt (CMD)
- Type ipconfig and hit enter
- You will see your default IP address
- Open Apple Menu in the top left and click on system preferences
- Click on the network tab and choose the network connection
- Click on Advance and click on TCP/IP
- You will see your IP on the right side
For Linux and Unix
- Open Terminal, Go to Applications>System Tools>Terminal
- Sort the command as IP course | grep default
- The above result will give this joe$ IP course | grep default
- Default by means of 192.168.0.1 dev eth0 proto static
- As seen above, the IP address is your default gateway
1. How To Troubleshoot An Unresponsive Router?
Steps to troubleshoot an unresponsive router:
- Check the connectivity of your cable (RJ45)
- Also, ensure the power supply is working properly
- See for the appropriate LEDs to be active
2. What if You Forgot Your Username and Password?
There are two choices in case you forget your username and password. First is to look for the default username and password. If you don’t find the correct combination then you will have to reset your router.
3. Why won't my phone let me on website http://192.168.0.1?
Your phone may not have the correct terminal or permission to access the advanced settings required to configure a device like routers or modem.
4. 192.168.0.1 not working
Check if your router has this IP as the default IP. Also check for any loose connection, if needed try to reset the router
5. How do I change router settings of 192.168.0.1?
To change the router settings, you will need to enter the admin panel by entering this IP in the URL then enter the correct login credentials and see for the settings that need to be changed.
6. Why won't 192.168.0.1 load?
The page may not load either because you are not entering the correct IP corresponding to your router or else there is some issue with your router. Try to reset both your system and the router
7. Why can't I connect to 192.168.0.1?
You may not be able to connect to the IP because there may be an issue between your system and the router. Check for if all the devices are running properly. If all seems good, do a hard reset and reconnect.
8. Why I can't open 192.168.0.1?
You can’t open 192.168.0.1 because it may not be the correct default IP for your router and so you may have to check for the correct IP address. In case, your IP is correct, do a hard reset of your router after checking if your router and system is running properly
Here’s How to Login to the Cisco DPC3825 Router
A router that is suitable for households and small offices is the Cisco DPC3825 model. It boasts a voice and networking gateway with additional features like NAT support, MAC address filtering, and … [Read more...]
Here’s How to Login to the Arris DG1670 Router
Arris routers and modems do not seem to fall short of delivering high-quality routers and modems. The Arris DG1670, also known as XB6, is a device that lets you connect to the web, home network, and … [Read more...]
5-Step Guide to Login to Arris SBG6580 Wi-Fi Cable Modem & Router
Arris routers and modems are one of the best network devices in the market as of now. The Arris SBG6580 also known as XB6 is a device that lets you connect to the web, your home network, and also the … [Read more...]