The Netgear router model AC1900 is a 4 port gigabit router which has dual-band wireless access point into a single device. You can get speeds up to 600+1300 Mbps. Netgear Modem AC1900 C6300BD complies … [Read more...]
192.168.1.254 Router Admin Login | Username and Password
The IP address 192.168.1.254 is a private IP address that comes in a range booked from IANA(Internet Assigned Number Authority) for specific purposes. When you buy a modem or router, you get credentials to log in to the router that allows you to make changes to your router. A private IP ensures there are no conflicts and no-one else can log in to your network.
Private networks are getting very popular and as per recent news, IANA has reserved many special address blocks for the next generation of IPv6 addresses. Private addresses are also used by many corporates for security reasons. In such a network, there is restricted access to the internet and often a proxy is required to access the web.
192.168.1.254 Username & Password
Every router and modem has login credentials and a default IP address that allows you to access the settings. 192.168.1.254 is an IP address that can be used to access the settings of routers like TP-Link, 2Wire, ADSL routers, 3Com routers, and Westell ADSL modems to name a few.
To access the default gateway, there are few prerequisites:
- A system connected to the home Wifi
- A system where you can access a browser
Step 1: Open the browser
You need to enter the default router IP address in the search bar and if your router has this specific IP address, you will get the login page.
Step 2: Enter the username and password
If you have just got yourself a new router with a private IP address then you must have the default router username and password, Use the below column to find out the default router username and password:
List of the username and password
PS: The credentials are usually printed on the box of the router. If you don’t have the router box with you, you can simply reset the router by press-and-hold the reset button for 10-15 seconds. Once reset, you can enter the default login details. Another way is to access the official site of router.
Step 3: Change the SSID
Even if you are using a private IP address for your network. We recommend you to change the SSID which is the name of the network visible to others in your network tab.
- Keep it short and simple
- Don’t make it very quirky as it may backfire
- Don’t use any personal information as the name of your router
Step 4: Change the default username and password
Your router may have a private IP address but you need to always ensure you make your connection secure by changing the default credentials. Follow the below tips while changing the details.
Tips to change your username and password:
- Your password should have a mixture of alphanumeric characters
- Your password should be 8-16 characters long, complex yet easy to remember
- Username should be user-friendly and simple
- Username and password for 192.168.1.254 IP address needs to be written down somewhere
Faqs and Problems
Why can't I connect to router: http://192.168.1.254
Most people can’t connect to the default login gateway because of a typing error. You need to make sure there is no semicolon but a colon after http or https. The correct address is http://192.168.1.254
How do I change the password for 192.168.1.254
First Access the default gateway using 192.168.1.254. Enter the username and password and see for WiFi setting(methods differ as per the router/modem), If you have direct TV & wifi then use a home network and choose the wireless router option. Type in Device Code when requested (found on side of a gateway). You can change a name, SAVE
To change the default password, users need to select WPA/PSK encryption settings which will highlight the grayed out password. Now Change password and save.
Forgot IP address username and password
Whenever you purchase a new router or mode, you get the default credentials that are printed over the box or are mentioned on the manual. You can also contact the ISP(Internet Service Provider) to get the default credentials.
Fix 1: Now, if you have never changed the default username and password, you can use the below table to find out the details of your router.
Fix 2: if you have already changed the default username and password, then you need to reset the router so that you can use the default credentials once again.
Steps to reset a router:
Warning: Resetting a router will erase all the previous saved details and settings. It will turn your router into a factory made a router.
- Turn off the router
- Press-and-hold the reset button for 10-15 seconds using a pointed object like a needle and then turn on the router. Keep pressing the reset button until the router is turned on for 10-15 seconds
- Release the button and let the router reboot
- Now connect to the router using a wifi connection and or a network cable and log in using default credentials
Pace Plc used to be a British brand that made set-top boxes. They were merged by Arris group and one of their best routers is the Pace 5268AC router. It has gigabit Wifi and comes with 4-gigabit … [Read more...]
2wire is a brand now owned by Arris International Plc. They were one of the best manufacturers of telecommunication equipment. 2wire routers give you great speeds in a network and come with the most … [Read more...]
Thomson Advanced cable gateway ACG905 -C router modem is wifi integrated DECT ACG905C. Thomson modem has got features like support for 5 handsets with which you can access voicemail, multi-line … [Read more...]
Motorola Netopia 3347-02 is a great router for both residential and business customers. Netopia router has both wired and wireless capabilities. The device has got world-class hardware design and a … [Read more...]